DELETE OUTSIDE/DELETE INSIDE
1. At the control panel, on the Services Home screen, touch CCooppyy, then touch the JJoobb AAsssseemmbbllyy tab.
2. Touch DDeelleettee OOuuttssiiddee//DDeelleettee IInnssiiddee.
3. Touch DDeelleettee OOuuttssiiddee or DDeelleettee IInnssiiddee.
4. If the original documents are 2-sided, select the applicable delete option:
• Both Sides
• Side 1 Only
• Side 2 Only
5. Touch AArreeaa 11.
6. To define a specific area, enter the two XY coordinates within a range of 0.0–431.8 mm (0.0–17.0 in.). To
navigate from coordinate to coordinate, touch each X and Y setting:
a. To enter the value for Y1, touch the Y1 box. To enter a number range, use the numeric keypad.
b. To enter the value for Y2, touch the Y2 box. To enter a number range, use the numeric keypad.
c. To enter the value for X1, touch the X1 box. To enter a number range, use the numeric keypad.
d. To enter the value for X2, touch the X2 box. To enter a number range, use the numeric keypad.
To clear a deletion area, touch CClleeaarr AArreeaa XX, then use the numeric keypad and press 11, 22, or 33.
7. Touch SSaavvee.
8. Touch SSaavvee again.
9. Enter the QQuuaannttiittyy, then press the green SSttaarrtt button.
STORED PROGRAMMING
You can save frequently used features and job settings as Stored Programming, then access the settings using a
shortcut button. For more information, refer to Stored Programming.
The Stored Programming option not only remembers feature settings, but the option can record a series of
operations. This feature enables you to record the hierarchy of displayed screens for each step. For example, you
could use Stored Programming to record the following actions: Press the MMaacchhiinnee SSttaattuuss button, and display the
Print Reports screen to print reports.
• You can record up to 100 consecutive operations in each stored program.
• Store up to 40 programs.
• You cannot use the Build Job option with the Stored Programming option.
• There are situations where a stored program becomes invalid:
– When default values or paper tray settings are changed in the system setting, a stored program becomes
invalid.
– When buttons are added or removed from the touch screen, a stored program becomes invalid. The Stored
Programming feature remembers the location only of a button on the screen, not the name of the button.
For example, button positions can change when a job flow or job template is added or deleted.
76
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Copying
To Next Page
Loading...
Need help?
General