UNLOADING THE STACKER TRAY OR CART
Note: You can unload the High Capacity Stacker tray if the sheets are delivered to the Top Tray or to the PR
Finisher.
1. At the HCS control panel, press the UUnnllooaadd button.
2. After the Unload Indicator illuminates, open the HCS front door.
3. Position the securing bar on top of the stacked paper.
4. Pull the stacker cart straight out of the HCS.
5. Remove the securing bar.
6. Remove the paper from the stacker tray.
7. Push the empty stacker cart straight into the HCS.
8. Position the securing bar on the fixed area inside the HCS.
9. Close the front door. The tray rises to the operate position.
364
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
Need help?
General