2. Pull out Tray 1.
3. Pull out Transport Unit 4. Tray 2 comes out as you pull out Transport Unit 4.
4. Lift lever 4a, then remove the jammed paper.
Note: If paper is torn, check inside the printer and remove it.
5. Return lever 44aa to the original position.
6. Push in Tray 2 gently until it comes to a stop. Transport Unit 4 is inserted simultaneously.
7. Push in Tray 1 gently until it comes to a stop.
8. Close the front cover completely. If the front cover is open even slightly, the printer does not operate.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 241
Troubleshooting
To Next Page
Loading...
Need help?
General