Brother PR600 Service Manual

3 - 103
Main unit
Main unit
Assembly
15
Base cover R attachment
1. Attach the groove cover A 2 and the groove cover B 3 to the rear of the
base cover R 1.
2. Attach the groove cover C 5 to the rear of the base cover R lid 4.
3. Attach the base cover R with the 3 screws 1.
*Key point
• Fully draw the X-guide toward you before attachment.
4. Attach the base cover R lid to the base cover R with the 2 screws 2.
5. Attach the 2 screw covers.
Start movie clip (CD-ROM version only)
1
2
Torque
0.78 – 1.18 N-m
2
1
1
2
3 4
5
Screw, Pan (S/P washer)
M4X10DB
Color; Silver

Brother PR600 Specifications

General

Type	Embroidery machine
LCD Screen	Yes
USB Port	Yes
Built-in Memory	Yes
Connectivity	USB
Maximum Embroidery Area	200mm
Embroidery Area	200mm
Needle Count	6 needles