Brother PR600 Service Manual

2 - 62
Main unit
Thread cut unit
2
Cutter unit disassembly (Step 1)
1. Remove the retaining ring E2, and then remove the lever link assembly.
2. Remove the screw 1, and then remove the thread cutter sensor assembly
(white).
3. Remove the 2 screws 2, separate the cutter bracket 1 from the CT motor
bracket assembly 2, and then remove the 2 collars.
1
Retaining ring E2
1
2 2
2

Brother PR600 Specifications

General

Type	Embroidery machine
LCD Screen	Yes
USB Port	Yes
Built-in Memory	Yes
Connectivity	USB
Maximum Embroidery Area	200mm
Embroidery Area	200mm
Needle Count	6 needles