You can select whether to print received documents of the same paper size onto a single sheet of paper. This
setting is only available under the following conditions:
● You must select the same paper drawer for printing two consecutive pages of a received document.
● The paper in the selected paper drawer must be large enough for two consecutive pages to be printed out.
For example, if the A4 paper drawer is empty, but the A3 drawer is loaded, you can print two A4 originals onto a
single sheet of A3 paper. On the other hand, if the A3 paper drawer is empty but the A4 drawer is loaded, you
can print a reduced A3 original on A4 paper.
● If you set this to <On>, documents are printed with a dotted line in the middle. If you print the
document with sender information, the dotted line is not printed in the area where the sender
information is located.
<Print RX Page Footer>
<Function Settings> <Receive/Forward> <Common Settings>
You can select whether to print information, such as reception time and page number, at the bottom of
received documents.
<YCbCr RX Gamma Value>
<Function Settings> <Receive/Forward> <Common Settings>
You can print received I-fax documents in the appropriate quality.
● This setting is disabled when receiving faxes.
<Interrupt and Print RX Jobs>
<Function Settings> <Receive/Forward> <Common Settings>
You can set to suspend other jobs to print faxes/I-faxes when the machine receives them.
<Use Forwarding Settings>
<Function Settings> <Receive/Forward> <Common Settings>
You can select whether to forward received documents to other destinations such as the Condential Fax Inbox
of the machine and an external le server. If you select <On>, specify the forwarding conditions in <Forwarding
Settings>.
<Handle Files with Forwarding Errors>
<Function Settings> <Receive/Forward> <Common Settings>
You can set how the machine handles documents that fail to be forwarded.
Settings/Registration
789
To Next Page
Loading...
Need help?
General
