GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 8 Replacement Procedures 8-33
8-5-6 Loading Software
It may be a good idea to load software before replacing the covers.
Refer to loading Base Image software and loading Applications software.
1.) Plug in the power cable to the system, connect the system to the AC outlet and turn on the circuit
breaker.
2.) Power up the system to begin the software load.
8-5-7 Replace Covers
1.) With the software load complete and verified, replace the BEP Cover.
2.) Replace the system right side cover.
To Next Page
Loading...
Need help?
General
