GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 8 Replacement Procedures 8-53
Section 8-11
Image Management Guide
8-11-1 Managing Patient Data and Presets
Save to MOD or CD-R any patient data, images, and system presets that have been stored or
configured. Installing the base operating software may delete some patient data, images and system
setups saved on the system.
8-11-1-1 Patient Images and Data
Save As to View on any PC
Use this to save images (Dicom or Raw Dicom) in a computer-friendly format (.avi or .jpeg) so you
can view it on any PC.
Move Images to Archive
Use this to take images off your Ultrasound system onto removable media for long-term archive.
This is the way to free up hard disk space, rather than deleting images.
Export/Import Data/Images Between Systems
Use this to copy both patient data and images for specified patient(s) from one system to another.
8-11-1-2 Preset Data
Patient, Report, and User-Defined Backup Protocols
Back up patient data AFTER you’ve archived (moved) images so that the pointers to the patient’s
images reflect that the images have been moved to removable media and are no longer on the hard
drive.
8-11-1-3 Backup Media
CD-ROM Media Requirements
Only use CD-R CD-ROMs, DO NOT use CD-RW CD-ROMs. Also, the CD-R CD-ROM MUST
support 16x writing speed or greater.
CD-ROM Handling Tips
To eject the CD-ROM, always press F3. DO NOT press the eject button on the CD Drive.
Always finalize the CD-ROM. This allows you to read the CD-ROM on any other PC.
DO NOT finalize the CD if you want to add more images to the CD.
To Next Page
Loading...
Need help?
General
