GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 1 Introduction 1-5
1-2-3 Product Icons
The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-5 Product Icons
LABEL/SYMBOL PURPOSE/MEANING LOCATION
Identification and Rating Plate
Manufacturer's name and address
Date of manufacture
Model and serial numbers
Electrical ratings
Rear of console near power inlet
Under monitor
On each probe
Device Listing/Certification Labels
Laboratory logo or labels denoting
conformance with industry safety standards
such as UL or IEC.
Rear of console
Under front of monitor
Type/Class Label
Used to indicate the degree of safety or protection.
IP Code (IPX8)
Indicates the degree of protection provided by
the enclosure per IEC 529. IPX8 indicates drip
proof.
Footswitch
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having even more electrical isolation than
standard Type B equipment because it is
intended for intimate patient contact.
Probe connectors
PCG connector
or Rear of Console
Equipment Type CF (heart in the box symbol)
IEC 878-02-05 indicates equipment having a
high degree of protection suitable for direct
cardiac contact.
ECG connector
Surgical probes
“CAUTION
This unit weighs...
Special care must be used to avoid..."
This precaution is intended to prevent injury
that may result if one person attempt to move
the unit considerable distances or on an incline
due to the weight of the unit.
On the console where easily seen during transport
"CAUTION" The equilateral triangle is usually
used in combination with other symbols to
advise or warn the user.
Various
To Next Page
Loading...
Need help?
General
