Lenze i700 User Manual

Lenze · i700 servo inverter · reference manual · DMS 3.0 EN · 06/2016 · TD06 308
10 Service/internal
10.2 Reserved objects
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2 Reserved objects
 Note!
For the servo inverter i700, various "reserved objects" are provided, which must solely be
used device-internally and must not be written to by the user!
The following reserved objects are provided:
• 0x2C10 Sensorless synchronous control: low speed range, HF-based
• 0x2C11 Sensorless synchronous control: High speed range
• 0x2C12 Sensorless synchronous control: low speed range, current-controlled
• 0x2C13 Sensorless synchronous control: Low speed range, operating mode

Lenze i700 Specifications

General

Control Type	Vector control, V/f control
Safety	STO (Safe Torque Off)
Protection Class	IP20
Frequency	50/60 Hz
Communication Interfaces	CANopen
Cooling	Air cooled
Protection Features	Overvoltage, Undervoltage
Ambient Temperature	-10°C to +45°C
Frequency Range	0 Hz to 300 Hz
Supply Voltage	3-phase AC