Appendix: LAN Interface
R&S
®
ESR
1074User Manual 1175.7068.02 ─ 12
14 Appendix: LAN Interface
In this appendix, additional information on the LAN interface is given. How to connect
the instrument to the network and configure the network protocols is described in
Chapter 11.2.6, "Setting Up a Network (LAN) Connection", on page 623.
Network restrictions and entering passwords
Only user accounts with administrator rights can configure LAN networks. For details
see Chapter 3.2.5.3, "Login", on page 57.
In some of the following step-by-step instructions, user names and passwords must be
entered. This requires using the touchscreen and the on-screen keyboard, or a mouse
and an external keyboard (see Chapter 3.4, "Basic Operations", on page 63 and Chap-
ter 3.2.2, "Connecting USB Devices", on page 46.
● Configuring the Network......................................................................................1074
● Operation with Windows Remote Desktop .........................................................1081
● Operation with a VNC Client............................................................................... 1085
● Starting and Terminating Remote Operation.......................................................1086
● Deactivating the R&S ESR via Remote Operation..............................................1088
14.1 Configuring the Network
After network support has been installed, data can be exchanged between the instru-
ment and other computers, and network printers can be used.
Network operation is only possible if you are authorized to access network resources.
Typical resources are file directories of other computers or even central printers.
Authorization is assigned by the network or server administrator.
Connection to networks
Before connecting the instrument to the network or configuring the network, consult
your network administrator, particularly for large LAN installations. Errors may affect
the entire network.
Never connect your analyzer to a network unprotected against virus infection because
this may cause damage to the instrument software.
To integrate the instrument into your network, you can change the following system
properties:
●
Computer name
●
Domain
●
Workgroup
Configuring the Network
To Next Page
Loading...
Need help?
General
