R&S ESR Series User Manual

Spectrum Measurements
R&S
®
ESR
305User Manual 1175.7068.02 ─ 12
●
Detector
Selects the detector for the final measurement.
For more information see Chapter 5.2.2, "Detectors", on page 167.
●
Auto Peak
Turns automatic peak search for all markers on and off.
For more information see "Performing a Peak Search" on page 299.
●
Dwell Time
Sets the dwell time for all markers.
For more information see "Measuring at the Marker Position" on page 300.
●
All Markers Off
Turns all markers off.
Remote command:
Reference marker:
CALCulate<n>:DELTamarker<m>:MREF
Trace:
CALCulate<n>:DELTamarker<m>:TRACe on page 701
CALCulate<n>:MARKer<m>:TRACe on page 695
Detector:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DETector on page 780
CALCulate<n>:DELTamarker<m>:FUNCtion:FMEasurement:DETector
on page 779
Auto peak:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:PSEarch:AUTO
on page 781
Dwell time:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DWELl on page 780
All marker off:
CALCulate<n>:MARKer<m>:AOFF on page 691
CALCulate<n>:DELTamarker<m>:AOFF on page 697
See also the documentation of the base unit for information on how to remotely work
with markers in general.
Final Evaluation
The reference section contains an overview of all functions that are part of the chapter
and lists the associated elements of the user interface.
Dwell Time
Sets the dwell time for the EMI marker measurement.
For more information see "Measuring at the Marker Position" on page 300.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:FMEasurement:DWELl on page 780
Marker Table
If more than two markers have been activated, the application adds a marker table to
the display below the diagram area. The size of the table depends on the number of
markers that are active. It contains the following information for every marker.
Measurements

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English