R&S ESR Series User Manual

Spectrum Measurements
R&S
®
ESR
416User Manual 1175.7068.02 ─ 12
6.3.3.4 Measuring with Markers (MKR FUNC Key)
The [MKR FUNC] key provides various functions for markers, e.g.
●
Phase Noise measurements
●
Setting reference points
●
Marker demodulation
●
Defining Marker peak lists
●
Signal counts
●
Measuring the power for a band around the marker
To open the marker function menu
●
Press the [MKR FUNC] key.
The "Mkr Func" (marker function) menu is displayed.
Menu and softkey description
●
"Softkeys of the Marker Function Menu" on page 416
Further information
●
"AF Demodulation" on page 425
●
"Frequency Measurement with the Frequency Counter" on page 426
●
"Measurement of Noise Density" on page 426
●
"Measurement example for Phase Noise Auto Peak Search" on page 428
Tasks
●
"Setting a Fixed Reference Point (Phase Noise Measurement)" on page 425
●
"Setting the Demodulation Mode and Duration" on page 425
●
"Performing Band Power Measurements" on page 428
Softkeys of the Marker Function Menu
The following table shows all softkeys available in the marker function menu. It is pos-
sible that your instrument configuration does not provide all softkeys. If a softkey is
only available with a special option, model or (measurement) mode, this information is
provided in the corresponding softkey description.
Select Marker (No)......................................................................................................417
Signal Count................................................................................................................417
Noise Meas On/Off......................................................................................................418
Phase Noise................................................................................................................418
└ Phase Noise On/Off......................................................................................418
└ Ref Point Level..............................................................................................418
└ Ref Point Frequency (span > 0)/Ref Point Time (zero span)........................418
└ Peak Search................................................................................................. 418
└ Ph. Noise Auto Peak Search........................................................................ 419
└ Select Marker (No)........................................................................................419
Ref Fixed.....................................................................................................................419
Analysis

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English