To Next Page

To Previous Page

Quick Start

R&S

ESR

55User Manual 1175.7068.02 ─ 12

6. To redirect the output to a postscript file rather than a printer, select the "Print to

file" option.

7. In the "Orientation" field, select the desired orientation.

8. Optionally, activate the "Print Date and Time" option to add this information to the

printout.

9. Click "OK" to accept the settings and to close the dialog box.

Selecting the Printout Colors

1. Press the [PRINT] key.

2. Press the "Colors" softkey.

3. To print in color, press the "Select Print Color Set" softkey to select the color set.

The "Select Print Color Set" dialog box is displayed.

4. Select the color set by using the arrow keys and confirm your selection by pressing

the [ENTER] key.

● "Screen Colors (Print)" option: The current screen colors are used for the print-

out. Independently of the current screen colors, the background is printed in

white and the grid in black.

Remote command: HCOP:CMAP:DEF1

● "Optimized Colors" option: This setting improves the color clarity of the printout.

Trace 1 is printed in blue, trace 2 in black, trace 3 in bright green, trace 4 in

pink, trace 5 in sea green, trace 6 in dark red, and the markers in sky blue. The

background is printed in white and the grid in black. The other colors corre-

spond to the screen colors of the default color setting of the "Setup" menu.

Remote command: HCOP:CMAP:DEF2

● "User Defined Colors" option: You define and use your own color set for the

printout. For details how to proceed refer to "Defining and Using a User-

Defined Color Set" on page 52.

Remote command: HCOP:CMAP:DEF3

● "Screen Colors (Hardcopy)" option: The current screen colors without any

changes for a hardcopy. For details on the output format see"Configuring the

Printer and the Printout" on page 54 .

Remote command: HCOP:CMAP:DEF4

5. If you want a black-and-white printout, press the "Color On/Off" softkey to switch off

the color. In the black-and-white printout, all background colors are printed out in

white and all color lines in black. This allows you to improve contrast on the print-

out.

Remote command: HCOP:DEV:COL ON

Preparing for Use

R&S ESR Series User Manual

Questions and Answers: