To Next Page

To Previous Page

Measurement Modes

R&S

ESR

141User Manual 1175.7068.02 ─ 12

SCPI command:

INST SAN

4.3 I/Q Analyzer Mode

The I/Q Analyzer mode provides measurement and display functions for digital I/Q sig-

nals.

For more information on functionality available for the I/Q Analyzer see Chapter 7, "I/Q

Analyzer", on page 458.

SCPI command:

TRACe<n>:IQ[:STATe] on page 898

4.4 Real Time Mode

In Real Time mode, the R&S ESR performs measurements in the frequency spectrum

of a test signal without losing any signal data. You can evaluate the measurement

results in several result displays that are designed for the realtime analysis and com-

plement one another.

Real Time analysis is available with firmware application R&S ESR-K55 and hardware

option R&S ESR-B50.

For more information on functionality available for the Real Time mode see the sepa-

rate User Manual available for download on the internet (http://www2.rohde-

schwarz.com/product/ESR.html).

SCPI command:

INST RTIM

4.5 Measurement Mode Root Menus (HOME Key)

The HOME key provides a quick access to the root menu of the current measurement

mode.

Measurement Mode Root Menus (HOME Key)

R&S ESR Series User Manual

Questions and Answers: