7-62 CHASSIS
•
Remove
the range lever.
Remove
the
O-rings
and spacer.
A CAUTION
Replace
the removed O-rings
with
new ones.
INSPECTION
Inspect
the range lever assembly for wear
or
damages.
If
any
damages
are
found, replace the range lever assembly
with
a
new
one.
REASSEMBLY
AND REMOUNTING
Reassemble and remount the range lever
in
the reverse order
of
removal
and
disassembly.
Pay
attention
to the
following
point:
•
Apply
SUZUKI
SUPER
GREASE
"A" to
the spacer, mating
surface
of
the range lever, and O-rings.
For
USA
99000-25030:
SUZUKI
SUPER
GREASE
"A"
For
the other countries
99000-25010:
SUZUKI
SUPER
GREASE
"A"
•
Align the
slit
© in
the range lever arm
with
the punch mark
©
on the range lever.
NOTE:
Adjust
the range lever cable, after installing the range lever and
its
cable.
fcZF
7-65 and 7-66)
To Next Page
Loading...
Need help?
General
