3-8 ENGINE
ENGINE REMOUNTING
Remount
the engine in the reverse order
of
engine removal.
•
Install
the engine mounting nuts and bolts.
NOTE:
Temporally tighten the nuts in this stage.
The
engine mounting nuts are self-locking.
Once
the nut has been removed, it is no longer of any use. Be
sure
to use new nuts, and then tighten them to the specified
torque.
H
©: 23 N-m (2.3 kgf-m,
16.5lb-ft)
©
:
26 N m (2.6 kgf-m,
19.0lb-ft)
Hold
the
bolt-head
with
a
wrench,
and
then tighten
the
engine mounting nuts to the specified torque.
LENGTH
ITEM
Nm
kgf-m
Ib-ft
®
40 4.0 29.0
®
55 5.5 40.0
©
55 5.5 40.0
®
55 5.5
40.0
Bolt©
60 mm (2.4 in)
Bolt© 180 mm (7.1
in)
Bolt© 235 mm (9.3 in)
Bolt© 215 mm (8.5 in)
To Next Page
Loading...
Need help?
General
