Xerox Phaser 7100 Service Manual

Plug/Jack and Wiring Diagrams
Phaser 7100 Service Manual Xerox Internal Use Only7-36
5 ROS
Connection between the Laser Unit (ROS Assembly) and the MCU PWB.
Connection between the Laser Unit (ROS Assembly) and the LVPS PWB.
6 Controller
Connection between the Image Processor PWB and the MCU PWB.
Connection between the Image Processor PWB and the LVPS PWB.
Connection between the Laser Unit (ROS Assembly) and the Image Processor PWB.
7 Paper Transport
Connection between the Turn Roller Clutch and the MCU PWB.
Connection between the Registration Clutch and the MCU PWB.
Connection between the Registration Sensor and the MCU PWB.
Connection between the No Paper Sensor and the MCU PWB.
Connection between the Feed Roller Clutch and the MCU PWB.
Connection between the Paper Size Switch and the MCU PWB.
8 Electrical
Connection between the Temp/ Humidity (Environmental) Sensor and the MCU PWB.
Connection between the Developer Fan (Process Fan) and the MCU PWB.
Connection between the Waste Auger (Trickle Guide) Assembly and the MCU PWB.
Connection between the EEPROM PWB and the MCU PWB.
9 Transfer
Connection between the CTD Sensor Assembly and the MCU PWB.
Connection between the
IBT Retract Cam Assembly and the MCU PWB.
Connection between the Front Cover Switch and the MCU PWB.
Connection between the HVPS2 Fan and the MCU PWB.
Connection between the Waste Toner Motor and the MCU PWB.
Connection between the Waste Cartridge (Toner Full) Full Sensor and the MCU PWB.
10 HVPS
Connection between the HVPS2 PWB and the MCU PWB.
Connection between the HVPS1 PWB and the MCU PWB.

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English