Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-47
REP 2.8 Left Tray Guide Assembly
PL 2.1.9
1. Remove Tray 1.
2. Remove the I/P PWB Cover Assembly (REP 1.5 Image Processor (I/P) PWB Cover Assembly on
page 4-19).
3. Remove the Rear Cover (REP 1.6 Rear Cover on page 4-20).
4. Remove the Right Side Cover (REP 1.11 Right Side Cover on page 4-27).
5. Remove the Right Feeder Cover (REP 2.3 Right Feeder Cover on page 4-40).
6. Remove the Protect Cover Assembly (REP 2.7 Protect Cover Assembly on page 4-44).
7. Remove the Right Turn Bracket Assembly (REP 2.4 Right Turn Bracket Assembly on page 4-41).
8. Remove the Feeder Assembly (REP 2.1 Feeder Assembly on page 4-37).
9. Remove the Left Side Cover (REP 1.10 Left Side Cover on page 4-25).
10. Remove the Left Feeder Cover (REP 2.10 Left Feeder Cover on page 4-49).
11. Remove the Tray Cover (REP 2.11 Tray Cover on page 4-50).
12. Remove 2 screws (silver, tapped, 10mm) that secure the Tray Guide Assembly.
13. From the inside of the printer, release the hook that secures the Left Tray Guide Assembly while
pushing the Guide Assembly toward the front and inner side of the printer and pull the Guide
Assembly out to remove.
s7100-065
Hook

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English