Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-285
REP 15.22 Feeder PWB
PL 15.2.33
CAUTION: PWB’s can be damaged by an electrostatic discharge. Observe all ESD procedures to
avoid component damage.
1. Remove the 550 Left Feeder Cover (REP 15.8 550 Left Feeder Cover on page 4-268).
2. Disconnect 5 wiring harness connectors (P/J419, P/J420, P/J421, P/J422, and P/J423) that are
connected to the Feeder PWB.
3. Remove 4 screws (silver, 6 mm) that secure the Feeder PWB and remove the Feeder PWB.
s7100-242
P/J420
P/J422
P/J423
P/J421
P/J419

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English