Xerox Phaser 7100 Service Manual

Maintenance
Phaser 7100 Service Manual Xerox Internal Use Only6-18
11. Press Back.
12. Press Down Arrow and navigate to Adjust Color Regi, and press OK.
13. The Adjust Color Regi Adjust Cyan message appears.
14. Press Down Arrow and navigate to the desired color - Adjust Yellow, Adjust Magenta, Adjust Cyan,
or Start Adjustment.
15. Select the color to be adjusted.
16. Press OK.
17. Navigate to the left or right field to enter the value. Use Arrows to adjust the value to what you
circled in steps 9 and 10, then press OK.
18. Press Back Arrow to return to the Adjust Color Regi Adjust Cyan screen.
19. Press Down Arrow and navigate to Start Adjustment, and press OK.
20. A Press OK to start color adjustment message appears.
21. Press OK.
22. A Color Registration adjusted message appears.
23. Press Back, then repeat steps 14 through 23 for the other colors.
24. Print the Color Registration Chart, then repeat the process until the color registration corrections
are completed.
Adjusting Paper Type
Adjust Paper Type adjustment compensates for paper thickness within a paper type.
• If the printed image is too light, use a heavier paper type.
• If the printed image is mottled or blotchy-looking, use a lighter paper type.
Procedure
1. On the Control Panel, press Menu.
2. Press Down Arrow and navigate to Admin Menu, and press OK.
3. Press Down Arrow and navigate to Printer Settings, and press OK.
4. Press Down Arrow and navigate to Paper Type, and press OK.
5. Press Down Arrow and navigate to the desired paper tray, and press OK.
6. Press Down Arrow and navigate to the paper type, and press OK to adjust the paper type.
7. Press Menu to return to the Ready to Print screen.

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English