Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-121
Xerographics
REP 6.0 Imaging Unit (Y/ M/ C/ K)
PL 6.1.1/ PL 6.1.4
CAUTION: Do not expose the Imaging Unit to light for more than 5 minutes. Cover the Imaging
Unit to avoid damage. Do not touch the surface of the Imaging Unit.
Note: The C, M, and Y Imaging Units are the same part and can be placed in any location.
1. Release latch A and open the Front Frame Assembly (PL 4.1.6).
2. Release latch C and open the Top Cover Assembly (PL 1.1.1) together with the Toner Cartridge
Cover Assembly (PL 1.1.12).
CAUTION: Be sure to hold the Toner Cartridge Cover Assembly together with the Top Cover
Assembly to prevent the Toner Cartridge Cover Assembly from swinging loosely.
CAUTION: Do not touch the bottom of the IBT Belt to prevent damaging the IBT Belt.
3. Release the Stand Bar Assembly (PL 9.1.26) from the Top Cover Assembly and secure the Stand
Bar in the holder.
C
s7100-251
s7100-252
1
2

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English