Error Troubleshooting
Phaser 7100 Service Manual Xerox Internal Use Only2-142
PDF Short of Memory
Insufficient memory was detected during PDF Bridge process.
Applicable Fault Code
• 016-752: PDF Short of Memory
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
PDF Password Mismatched
When processing a PDF file that is protected by a password, the password in the Control Panel settings
and the password specified using XPJL (set in the Contents Bridge Utility) do not match.
Applicable Fault Code
• 016-753: PDF Password Mismatched
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. If the Print Mode is High Quality, change it to Normal. If it is Normal, change it to High Speed.
(Only for printers with High Quality mode.)
2. If the problem still persists, increase the memory.
If the problem still occurs despite having increased the memory to the maximum, use the driver from
Acrobat Reader to print.
Troubleshooting Procedure
Step Actions and Questions
1. Specify the correct password using the Control Panel or Contents Bridge.
To Next Page
Loading...
Need help?
General