Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-279
REP 15.17 Turn Roller Assembly
PL 15.2.24
1. Remove the 550 Left Feeder Cover (REP 15.8 550 Left Feeder Cover on page 4-268).
2. Remove the 550 Right Feeder Cover (REP 15.2 550 Right Feeder Cover on page 4-262).
3. Remove the Turn Chute Assembly (REP 15.10 Turn Chute Assembly on page 4-270).
4. Remove the Turn Roller Clutch (REP 15.18 Turn Roller Clutch on page 4-280).
5. Remove the KL Clip that secures the Turn Roller Assembly to the Turn Gear Assembly 17 (PL
15.2.22), and pull out the Turn Gear Assembly to remove.
6. Remove the E-ring that secures the left Bearing.
7. Pull out and remove the left and right Bearings from the Turn Roller Assembly.
8. Slide the Turn Roller Assembly temporarily to the right, free the left tip of the Turn Roller Assembly
from the hole of the Bearing, and then pull it to the left and forward to remove it.
s7100-236
KL Clip
E-Ring

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English