Error Troubleshooting
Xerox Internal Use Only Phaser 7100 Service Manual 2-353
116-390 Standard ROM and NVM Version Mismatch
A mismatch in the versions of the Standard ROM and NVM was detected.
Applicable Fault Code
• 116-390: Standard ROM and NVM Version Mismatch
Initial Actions
• Power cycle the printer.
• If the problem persists, perform the following procedure
.
Troubleshooting Procedure
Step Actions and Questions
1. Initialize the NVM (DC301 NVM Initialize on page 2-50).
To Next Page
Loading...
Need help?
General