Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-104
REP 4.9 Bypass Tray Feed Solenoid
PL 4.3.10
1. Release latch A and open the Front Frame Assembly (PL 4.1.6) until it is in a position where it is
convenient to perform the operation and maintain that position to perform the subsequent steps.
2. Remove the Transfer Roller (2nd BTR Unit) (REP 4.10 Transfer Roller (2nd BTR Unit) on
page 4-108).
3. Remove the Left Latch Lever (REP 4.4 Right/ Left Latch Lever, Latch Spring on page 4-89).
To Next Page
Loading...
Need help?
General