Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-105
4. Release the 4 tabs that secure the Fuser Motor Harness Cover (PL 4.2.14) to the D Gear Cover (PL
4.2.15) and remove the Fuser Motor Harness Cover.
5. Disconnect the wiring harness connectors (P/J242 and P/J4755) that are connected to the Fuser
Drive Assembly and remove the harness from D Gear Cover.
6. Remove 2 screws (silver, 6 mm) that secure the D Gear Cover to the Front Frame Assembly.
7. Release the wiring harness from the D Gear Cover and release the 2 tabs while removing the D
Gear Cover.
s7100-226
P/J242
P/J4755
D Gear Cover
Tab
Tab
Fuser Harness
Motor Cover
Tab

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English