General and Operation Overview
Xerox Internal Use Only Phaser 7100 Service Manual 1-13
Do not expose the Imaging Unit to light.
It may take 40 minutes for the Fuser to cool down.
Cover is not self-supporting. Use care to support with your hand or the
built-in support.
Do not try to close the Toner Cover while Cover C is open.
To prevent a printer malfunction or internal Hard Disk Drive (HDD)
damage, ensure that the HDD Control Panel indicator is Off before
turning Off the power switch.
Recycle the item.
Protective Ground symbol.
Symbol Description
s7100-151
To Next Page
Loading...
Need help?
General