Xerox Phaser 7100 Service Manual

Service Parts Disassembly
Xerox Internal Use Only Phaser 7100 Service Manual 4-75
Note: If you wish to perform the next operations with the Front Cover Assembly removed, insert
the removed Left and Right Pins (PL 3.1.10/ PL 3.1.13) back to their original positions and secure
them in place before starting the procedure.
13. Move the wiring harness out of the way.
14. Disconnect the wiring harness connector P/J459 on the MCU PWB.
15. Remove the Damper Spring (PL 4.1.3) from the Damper Assembly.
Note: Be sure to close the Front Frame Assembly prior to removing the Spring.
s7100-092
P/J459

Xerox Phaser 7100 Specifications

General

Brand	Xerox
Model	Phaser 7100
Category	Printer
Language	English