Service Parts Disassembly
Phaser 7100 Service Manual Xerox Internal Use Only4-132
17. Release the wiring harness from the 4 clamps and the Edge Saddle beside the LVPS.
18. Release the wiring harness from the 2 clamps below the LVPS.
19. Disconnect the 3 wiring harness connectors (P/J4691, P/J5251, and P/J4021) that are connected
to the Laser Unit (hidden behind the harness).
20. Release the cable tie from the printer frame.
s7100-134
Edge Saddle
Cable Tie
Clamp
Clamp
P/J4021
P/J5251
P/J4691
To Next Page
Loading...
Need help?
General