ELECTRICAL SPECIFICATIONS
2-12
EAS20310
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition system Transistorized coil ignition (digital)
Advancer type Digital
Ignition timing (B.T.D.C.) 10.0 °/1200 r/min
Crankshaft position sensor resistance 189–231 Ω (Gy-B)
Engine control unit
Model/manufacturer XP500 TBDF48/DENSO
XP500A TBDF49/DENSO
XP500W TBDF07/DENSO
Ignition coil
Model/manufacturer JO313/DENSO
Minimum ignition spark gap 6.0 mm (0.24 in)
Primary coil resistance 1.87–2.53 Ω
Secondary coil resistance 12.00–18.00 kΩ
Spark plug cap
Material Resin
Resistance 10.0 kΩ
AC magneto
Model/manufacturer F4T383/MITSUBISHI
Standard output 14.0 V350 W5000 r/min
Stator coil resistance 0.216–0.264 Ω
Rectifier/regulator
Regulator type Semi conductor-short circuit
Model/manufacturer SH719AA/SHINDENGEN
Regulated voltage (DC) 14.1–14.9 V
Rectifier capacity (DC) 25.0 A
Withstand voltage 240.0 V
Battery
Model GT9B-4
Voltage, capacity 12 V, 8.0 Ah
Specific gravity 1.320
Manufacturer GYM
Ten hour rate amperage 0.80 A
Headlight
Bulb type Halogen bulb
Bulb voltage, wattage × quantity
Headlight 12 V, 60 W/55.0 W × 1
Headlight 12 V, 55.0 W × 1
Auxiliary light XP500 12 V, 5.0 W × 2
XP500A 12 V, 5.0 W × 2
XP500W 12 V, 5.0 W × 2 (AUS)
Tail/brake light 12 V, 5.0 W/21.0 W × 2
Front turn signal/position light 12 V, 21 W/5.0 W × 2
Rear turn signal light 12 V, 21.0 W × 2
To Next Page
Loading...
