Dell PowerConnect 6224 User Manual

114 Configuring Dell PowerConnect
The switch is now configured and can be managed through the different options such as Telnet, Web
browser interface, and others.
Configuring Secure Management Access (HTTPS)
When managing the switch securely through the standard Web browser, the SSL (Secure Socket Layer)
security protocol is used.
To manage the switch securely through the standard Web browser, perform the following:
1.
In order to configure the switch to allow HTTPS server, and to create a security key, use the commands
ip https server and crypto certificate 1 generate :
console#configure
console(config)#crypto certificate 1 generate
Generating RSA private key, 1024 bit long modulus
console(config)#ip https server
console(config)#
2.
Configure the management station the same as for a regular HTTP connection.
3. Connect to the switch through HTTPS by typing the address https://device IP address in
the browser window (
https must be typed).
The
Security Alert window displays.
4. Click Yes to confirm accept the security certification (if it is not authenticated by a third party).
The
Login Screen displays.
5. Enter the assigned user name and password.
The switch Dell OpenManage™ Switch Administrator displays.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)