Dell PowerConnect 6224 User Manual

420 Configuring Switching Information
Modifying LLDP Interface Settings for Multiple Ports
1. Open the LLDP Configuration page.
2. Click Show All .
The
LLDP Interface Settings Table displays.
3. Click Edit for each Unit/Port to modify.
4. Edit the LLDP Interface fields as needed.
5. Click Apply Changes .
The LLDP Interface settings are modified, and the device is updated.
Configuring LLDP with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• LLDP Commands
The following table summarizes the equivalent CLI commands for this feature.
LLDP Statistics
Use the LLDP Statistics page to view LLPD-related statistics.
To display the LLDP Statistics page, click Switching
→ LLDP → LLDP Statistics in the tree view.
Table 7-50. LLDP Commands
CLI Command Description
lldp notification Enables remote data change notifications.
lldp notification-interval Limits how frequently remote data change notifications are sent.
lldp receive Enables the LLDP receive capability.
lldp timers Sets the timing parameters for local data transmission on ports enabled
for LLDP.
lldp transmit Enables the LLDP advertise capability.
lldp transmit-mgmt Specifies that transmission of the local system management address
information in the LLDPDUs is included.
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB basic management set
will be transmitted in the LLDPDUs.
show lldp Displays the current LLDP configuration summary.

Dell PowerConnect 6224 Specifications

General

Brand	Dell
Model	PowerConnect 6224
Category	Switch
Language	English