Dell PowerConnect 6224 User Manual

522 Configuring Routing
Stub Area Summary
The OSPF Stub Area Summary page displays OSPF stub area detail.
To display the page, click Routing
→ OSPF → Stub Area Summary in the tree view.
Figure 9-8. OSPF Stub Area Summary
The OSPF Stub Area Summary page displays the following fields:
• Area ID — The Area ID of the stub area.
•
Ty pe o f S e r v i c e — The type of service associated with the stub metric. The switch supports Normal
only.
•
Metric Value — The metric value for the default route advertised into the area.
•
Import Summary LSAs — Whether the import of Summary LASs is enabled or disabled.
Displaying OSPF Stub Area CLI Command
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
• OSPF Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-8. OSPF Area Configuration Commands
CLI Command Description
show ip ospf stub table Displays the OSPF stub table.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)