Dell PowerConnect 6224 User Manual

658 Configuring IPv6
OSPFv3 Neighbor Table
Use the OSPFv3 Neighbor Table page to display the OSPF neighbor table list. When a particular
neighbor ID is specified, detailed information about a neighbor is given. The neighbor table is only
displayed if OSPF is enabled.
To display the page, click IPv6
→ OSPFv3 → Neighbor Table in the tree view.
Figure 10-25. OSPFv3 Neighbor Table
The OSPFv3 Neighbor Table page displays the following fields:
• Interface — Selects the interface for which data is to be displayed or configured.
•
Neighbor Router ID — A 32-bit integer in dotted decimal format representing the neighbor interface.
•
Priority — The priority of this neighbor in the designated router election algorithm. A value of 0
indicates that the neighbor is not eligible to become the designated router on this network.
Table 10-19. OSPFv3 Neighbor Command
CLI Command Description
show ipv6 ospf neighbor Displays information about OSPF neighbors.

Dell PowerConnect 6224 Specifications

General

Brand	Dell
Model	PowerConnect 6224
Category	Switch
Language	English