EasyManuals Logo

Dell PowerConnect 6224 User Manual

Dell PowerConnect 6224
786 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #336 background imageLoading...
Page #336 background image
336 Configuring Switching Information
Figure 7-34. Static MAC Address Table
Removing a Static Address from the Static Address Table
1.
Open the
Static MAC Address
page.
2.
Click
Show All
to display the
Static MAC Address Table
.
3.
Check the
Remove
check box for the address to be removed.
4.
Click
Apply Changes
.
The static address is deleted, and the device is updated.
Configuring Static Address Parameters Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
Address Table Commands
The following table summarizes the equivalent CLI commands for this feature.
Dynamic Address Table
The Dynamic Address Table page contains fields for querying information in the dynamic address table,
including the interface type, MAC addresses, VLAN, and table sorting key. Packets forwarded to an
address stored in the address table are forwarded directly to those ports.
The Dynamic Address Table also contains information about the aging time before a dynamic MAC
address is removed from the table.
To display the Dynamic Address Table, click Switching
Address Tables
Dynamic Address Table in
the tree view.
Table 7-18. Static Address Table Commands
CLI Command Description
bridge address Adds a static MAC-layer station source address to the bridge table.
show bridge address-table static Displays static entries in the bridge-forwarding database.

Table of Contents

Other manuals for Dell PowerConnect 6224

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 6224 and is the answer not in the manual?

Dell PowerConnect 6224 Specifications

General IconGeneral
Switching Capacity128 Gbps
Forwarding Rate95.2 Mpps
Power Supply100-240 VAC, 50/60 Hz
RAM128 MB
Flash Memory32 MB
Layer SupportLayer 2/3
StackingUp to 12 units
Weight12.1 lbs
MAC Address Table Size16, 000
Jumbo Frame SupportUp to 9, 216 bytes
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity10% to 90% (non-condensing)
Ports24 x 10/100/1000BASE-T
VLAN SupportYes (802.1Q)
Dimensions17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)

Related product manuals