Dell PowerConnect 6224 User Manual

Configuring System Information 191
Authorization Network RADIUS
In some networks, the RADIUS server is responsible for assigning traffic to a particular VLAN. From the
Authorization Network RADIUS page, you can enable the switch to accept VLAN assignment by the
RADIUS server.
To display the Authorization Network RADIUS
page, click System Management → Security →
Authorization Network RADIUS in the tree view.
Figure 6-62. Authorization Network RADIUS
The Authorization Network RADIUS page contains the following field:
• Admin Mode — Enables or disables the ability of the switch to accept VLAN assignment from the
RADIUS server.
Enabling VLAN Assignments by the RADIUS Server Using CLI Commands
For information about the CLI commands that perform this function, see the RADIUS Commands
chapter in the CLI Reference Guide . The following table summarizes the equivalent CLI commands you
use.
Telnet Server
Use the Telnet Server page to enable or disable telnet service on the switch or to modify the telnet port.
To display the Telnet Ser ver page, click System
→ Management Security → Telnet Server.
Table 6-35. RADIUS Network Authorization Command
CLI Command Description
aaa authorization network default radius Enables the switch to accept VLAN assignment by the RADIUS server.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)