Dell PowerConnect 6224 User Manual

Configuring System Information 223
Access Control Group
Use the Access Control Group page to view information for creating SNMP groups, and to assign SNMP
access privileges. Groups allow network managers to assign access rights to specific device features or
features aspects.
To display the Access Control Group page, click System
→ SNMP → Access Control in the tree view.
Figure 6-89. Access Control Group
The Access Control Group page contains the following fields:
• Group Name — Contains a list of user-defined groups to which access control rules are applied. A
group name can contain a maximum of 30 alphanumeric characters.
•
Security Model — Defines the SNMP version attached to the group. The possible field values are:
–
SNMPv1 — SNMPv1 is defined for the group.
–
SNMPv2 — SNMPv2 is defined for the group.
–
SNMPv3 — SNMPv3 User Security Model (USM) is defined for the group.
•
Security Level — The security level attached to the group. Security levels apply to SNMPv3 groups
only. The possible field values are:
–
noauth no priv — Neither Authentication nor Privacy security levels are assigned to the group.
Table 6-41. SNMP Views Commands
CLI Command Description
show snmp views Displays the configuration of views.
snmp-server view Creates or updates an SNMP server view entry.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)