Dell PowerConnect 6224 User Manual

196 Configuring System Information
•User Group
• Interface Association
•CP Status
• CP Activation and Activity Status
• Interface Activation Status
• Interface Capability Status
• Client Summary
• Client Detail
•CP Interface Client Status
• CP Client Status
CP Global Configuration
From the CP Global Configuration page, you can control the administrative state of the CP feature and
configure global settings that affect all captive portals configured on the switch.
To configure the global CP settings, click System
→ Captive Portal → Global Configuration.
Figure 6-65. CP Global Configuration
The CP Global Configuration page contains the following fields:
• Captive Portal — Enable or disable the CP feature on the switch.
•
CP Global Operational Status — Shows whether the CP feature is enabled.
•
CP Global Disable Reason — If CP is disabled, this field displays the reason, which can be one of the
following:
–None
– Administrator Disabled

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)