Dell PowerConnect 6224 User Manual

Configuring System Information 169
2. Under HTTP , select an authentication method in the Optional Methods field and click the right
arrow button.
The selected authentication method moves to the
Selected Methods field.
3. Repeat until the desired authentication sequence is displayed in the Selected Methods field.
4. Click Apply Changes .
HTTP sessions are assigned the authentication sequence.
Assigning Access Methods, Authentication Profiles, or Sequences Using CLI Commands
For information about the CLI commands that perform this function, see the AAA Commands chapter
in the
CLI Reference Guide : The following table summarizes the equivalent CLI commands you use.
Assigning Secure HTTP Sessions an Authentication Sequence
1. Open the Select Authentication page.
2. Under Secure HTTP , select an authentication method in the Optional Methods field and click the
right arrow button.
The selected authentication method moves to the
Selected Methods field.
3. Repeat until the desired authentication sequence is displayed in the Selected Methods field.
4. Click Apply Changes .
Secure HTTP sessions are assigned the authentication sequence.
Password Management
Password management provides increased network security and improved password control. Passwords
for SSH, Telnet, HTTP, HTTPS, and SNMP access are assigned security features, including:
• Defining minimum password lengths (the minimum password length is 8 when password length-
checking is enabled)
• Password expiration
Table 6-24. Access Method and Authentication Profile Commands
CLI Command Description
enable authentication Specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console.
ip http authentication Specifies authentication methods for http.
ip https authentication Specifies authentication methods for https.
login authentication Specifies the login authentication method list for a remote telnet or
console.
show authentication methods Shows information about authentication methods.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)