Dell PowerConnect 6224 User Manual

622 Configuring IPv6
IPv6 Neighbor Table
Use the IPv6 Neighbor Table page to display IPv6 neighbor details for a specified interface.
To display the page, click IPv6
→ IPv6 Neighbor Table in the tree view.
Figure 10-5. IPv6 Neighbor Table
The IPv6 Neighbor Table page contains the following fields:
• Interface — Selects the interface for which neighbor state information is displayed.
•
Interface — Specifies the interface whose settings are displayed in the current table row.
•
IPv6 Address — Specifies the IPv6 address of neighbor or interface.
•
MAC Address — Specifies MAC address associated with an interface.
•
IsRtr —Indicates whether the neighbor is a router. If the neighbor is a router, the value is TRUE. If the
neighbor is not a router, the value is FALSE.
•
Neighbor State — Specifies the state of the neighbor cache entry. Following are the states for dynamic
entries in the IPv6 neighbor discovery cache:
–
Incmp — Address resolution is being performed on the entry. A neighbor solicitation message has
been sent to the solicited-node multicast address of the target, but the corresponding neighbor
advertisement message has not yet been received.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)