EasyManuals Logo

Dell PowerConnect 6224 User Manual

Dell PowerConnect 6224
786 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #574 background imageLoading...
Page #574 background image
574 Configuring Routing
Advertise Mode
The values are Enable or Disable. Enable denotes that Router Discovery is enabled
on that interface.
Advertise Address
— The IP Address used to advertise the router.
Maximum Advertise Interval (secs)
— The maximum time (in seconds) allowed between router
advertisements sent from the interface.
Minimum Advertise Interval (secs)
— The minimum time (in seconds) allowed between router
advertisements sent from the interface.
Advertise Lifetime (secs)
— The value (in seconds) used as the lifetime field in router advertisements
sent from the interface. This is the maximum length of time that the advertised addresses are to be
considered as valid router addresses by hosts.
Preference Level
— The preference level of the router as a default router relative to other routers on
the same subnet. Higher numbered addresses are preferred.
Displaying Router Discovery Status Using CLI Commands
For information about the CLI command that performs this function, see the following chapter in the
CLI Reference Guide:
Router Discovery Protocol Commands
The following table summarizes the equivalent CLI commands for this feature.
Router
The Router menu page contains links to web pages that configure and display route tables. To display
this page, click Routing
Router in the tree view. Following are the web pages accessible from this menu
page:
•Route Table
Best Routes Table
Route Entry Configuration
Configured Routes
Route Preferences Configuration
Route Table
Use the Router Route Table
page to display the route table configuration.
Table 9-31. Router Discovery Status Command
CLI Command Description
show ip irdp Displays the router discovery information for all interfaces, or for a
specified interface.

Table of Contents

Other manuals for Dell PowerConnect 6224

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 6224 and is the answer not in the manual?

Dell PowerConnect 6224 Specifications

General IconGeneral
Switching Capacity128 Gbps
Forwarding Rate95.2 Mpps
Power Supply100-240 VAC, 50/60 Hz
RAM128 MB
Flash Memory32 MB
Layer SupportLayer 2/3
StackingUp to 12 units
Weight12.1 lbs
MAC Address Table Size16, 000
Jumbo Frame SupportUp to 9, 216 bytes
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity10% to 90% (non-condensing)
Ports24 x 10/100/1000BASE-T
VLAN SupportYes (802.1Q)
Dimensions17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)

Related product manuals