Configuring System Information 239
The File System page contains the following fields:
•
File Name —
A text field listing the names of the files on the file system.
•
Image Description —
A field 0-128 characters in length that displays an image description of the file.
•
Size —
Displays the size of the specified file in bytes.
•
Remove —
Select to remove the specified file.
•
Flash Memory Details —
Displays Flash Memory availability details, in terms of total bytes of memory
used, and memory (in bytes) available.
Displaying the File System Using CLI Commands
For information about the CLI command that performs this function, see the
Configuration and Image
File Commands
chapter in the
CLI Reference Guide
. The following table displays the equivalent CLI
command you use to display system files.
Active Images
Use the Active Images
page to set the boot image.
To display the File System page, click System
→
File Management
→
Active Images in the tree view.
Figure 6-106. Active Images
The Active Images page contains the following fields:
•
Unit —
The unit on which the active image is running.
•
Active Image —
The name of the current active image.
Table 6-47. File System Command
CLI Command Description
filedescr Adds a description to a file.
show bootvar Displays the active system image file that the switch loads at startup.
show dir Lists all the files available on the flash file system.
To Next Page
Loading...
Need help?
General
