Dell PowerConnect 6224 User Manual

630 Configuring IPv6
Figure 10-9. Pool Summary
The Pool Summary page contains the following fields:
• Pool Name — Selects the pool to display.
•
DNS Server — Displays the IPv6 address of the associated DNS server.
•
Domain Name — Displays the DNS domain name.
•
Host IP Address — Displays the IPv6 address and mask length for the delegated prefix.
•
DUID — Identifier used to identify the client's unique DUID value.
•
Va l id Li f eti m e — Displays the valid lifetime in seconds for delegated prefix.
•
Prefer Lifetime — Displays the preferred lifetime in seconds for delegated prefix.
Displaying the Pool Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• DHCPv6 Commands
The following table summarizes the equivalent CLI commands for this feature.
DHCPv6 Interface Configuration
Use the DHCPv6 Interface Configuration page to configure a DHCPv6 interface.
To display the page, click IPv6
→ DHCPv6 → Interface Configuration in the tree view.
Table 10-9. DHCPv6 Pool Summary Command
CLI Command Description
show ipv6 dhcp pool Displays the configured DHCP pool.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)