176 Configuring System Information
3.
Confirm the Enable password.
4.
Click
Apply Changes
.
The Enable password is set.
Defining Enable Passwords Using CLI Commands
For information about the CLI commands that perform this function, see the AAA Commands chapter
in the
CLI Reference Guide.
The following table summarizes the equivalent CLI commands you use.
TACACS+ Settings
The device provide Terminal Access Controller Access Control System (TACACS+) client support.
TACACS+ provides centralized security for validation of users accessing the device.
TACACS+ provides a centralized user management system, while still retaining consistency with
RADIUS and other authentication processes. TACACS+ provides the following services:
•
Authentication —
Provides authentication during login and through user names and user-defined
passwords.
•
Authorization —
Performed at login. Once the authentication session is completed, an authorization
session starts using the authenticated user name. The TACACS+ server checks the user privileges.
The TACACS+ protocol ensures network security through encrypted protocol exchanges between the
device and TACACS+ server.
The TACACS+ Settings page contains both user-defined and the default TACACS+ settings for the
inband management port.
To display the TACACS+ Settings page, click System
→
Management Security
→
TACACS+ in the tree
view.
Table 6-28. Enable Passwords Commands
CLI Command Description
enable password Sets a local password to control access to the normal level.
To Next Page
Loading...
Need help?
General
