Configuring System Information 119
•
Power Supply
Status
— Displays the power supply status.
– — The power supply is operating normally.
– — The power supply is not operating normally.
–
Not Present
— The power supply is currently not present.
•
Temperature
— Displays the temperature at which the device is currently running.
Viewing System Health Information Using CLI Commands
For information about the CLI commands that perform this function, see the
System Management
Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI
commands you use to view system health information.
Versions
Use the Versions page to view information about the software versions currently running.
To display the Versions page, click System
→
General
→
Versions in the tree view.
Figure 6-3. Versions
The Versions page contains the following fields:
•
Unit No.
— Displays the unit’s number in the stack.
•
Boot Version
— Displays the version of the boot code.
•
Image1 Version
— Displays the version number of one of the two available software images.
•
Image2 Version
— Displays the version number of the other of the two available software images.
Table 6-2. System Health Commands
CLI Command Description
show system Use to display system information.
show system power Displays the power supply status.
show system temperature Displays the system temperature and fan status.
To Next Page
Loading...
Need help?
General
