Dell PowerConnect 6224 User Manual

Configuring System Information 217
captive-portal client deauthenticate Deauthenticates a specific captive portal client.
show captive-portal client status Displays client connection details or a connection summary for
connected captive portal users.
show captive-portal configuration client
status
Displays the clients authenticated to all captive portal configurations
or a to specific configuration.
show captive-portal interface client status Displays information about clients authenticated on all interfaces or a
specific interface.
show captive-portal interface configuration
status
Displays the clients authenticated to all captive portal configurations
or a to specific configuration.
clear captive-portal users Deletes all captive portal user entries.
no user Deletes a user from the local user database.
show captive-portal user Displays all configured users or a specific user in the captive portal
local user database.
user idle-timeout Sets the session idle timeout value for a captive portal user.
user name Modifies the user name for a local captive portal user.
Table 6-39. Captive Portal Configuration Commands
(continued)
CLI Command Description

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)