Dell PowerConnect 6224 User Manual

498 Viewing Statistics and Remote Monitoring
2. Click the radio button associated with the statistics to chart.
3. Select the type of statistics from the related drop-down menu.
4. Select the desired refresh rate from the Refresh Rate drop-down menu.
5. Click Draw .
The selected statistics are charted on the graph.
Viewing LAG Statistics Using CLI Commands
For information about the CLI commands that perform this function, see the following chapters in the
CLI Reference Guide :
• System Management Commands
• RMON Commands
• GVRP Commands
The following table summarizes the equivalent CLI commands for this feature.
The following table summarizes the equivalent CLI commands for this feature.
Table 8-14. LAG Statistics Commands
CLI Command Description
show interfaces counters Display traffic seen by the interface.
show statistics ethernet Displays detailed statistics for a specific port or for the entire switch.
show rmon statistics Displays RMON Ethernet Statistics.
show gvrp statistics Displays GVRP statistics.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)