Xerox PHASER 7500 Service Manual

3-132 Phaser 7500 Printer Service Manual
Error Messages and Codes
MK_Panel_NG
Communication error between IM and MK (when receiving Pitch Check, the
corresponding Panel Build is not received).
Applicable Chain-Link Code
• 045-321: MK_Panel_NG
Initial Actions
• Power cycle the printer.
• If the problem persists, follow the procedure below.
1. Turn the power Off and On.
2. Restore NVRAM. If the problem persists, replace the MCU PWB (REP 18.12,
page 8-202).
Troubleshooting Reference
Applicable Parts Wiring and Plug/Jack Map References
■ MCU PWB, PL18.3.6

Xerox PHASER 7500 Specifications

General

Brand	Xerox
Model	PHASER 7500
Category	Printer
Language	English