Xerox PHASER 7500 Service Manual

8-92 Phaser 7500 Printer Service Manual
Service Parts Disassembly
REP 10.2 Tray 3/4/5 Paper Size Sensor
PL10.1.8/ PL10.1.9/ PL10.1.10
1. Remove the Tray Assembly from the Tray Module (3T).
2. Disconnect the wiring harness connector P/J101 that is connected to the
Paper Size Sensor.
3. Remove 1 screw (silver, 8mm) that secures the Paper Size Sensor to the Tray
Module (3T).
4. Remove the Paper Size Sensor from the hooks at the installation section.
s7500-156
Paper Size Sensor

Xerox PHASER 7500 Specifications

General

Brand	Xerox
Model	PHASER 7500
Category	Printer
Language	English